Product/Service

MT-RJ Dual Wavelength Hand-held Test Set

Source: Corning Cable Systems
Siecor's OTS-311D-MTRJ is a dual-wavelength (850/1300 nm) hand-held tester with a dedicated MT-RJ connector
Corning Cable Systems OTS-311D-MTRJ is a dual-wavelength (850/1300 nm) hand-held tester with a dedicated MT-RJ connector. The units simultaneously test and store dual wavelength attenuation measurements. The synchronized meter and source alternates between wavelengths to continuously update the displayed data. Test time is cut in half and prevents costly documentation errors from mismatched source and meter wavelength readings. With the press of a button, dual wavelength measurements are stored and the next
fiber is measured. The units also provide system continuity (Tx to Rx) and actually test two fibers at once!

Test sets can be used during installation, system qualification, troubleshooting, and maintenance. The combination of practical features, ease of use, field performance, and rugged design make them perfect for fiber optic testing in the multimode Premise MT-RJ environments.

Designed for the end-user, units provide quick, user-friendly operation via a simple keyboard and backlit display with adjustable contrast and data storage of up to 900 dual wavelength fiber measurements. The user can select the resolution for either 0.1 dB or 0.01 dB. Units come standard with LinkLoss Windows based software to upload results onto a host PC. In addition, units have an internal mandrel wrap to eliminate overfilling the fiber core. Each OTS-311D-MTRJ unit comes complete with: AC charger adapter, rugged rubber boot, operation manual, and LinkLoss disk.

Features / Benefits

  • Dedicated MT-RJ connector
  • Auto testing provides dual wavelength display and storage that cuts testing time in half
  • Eliminates field paperwork –stores up to 900 dual-wavelength measurements and 50 jobs (files)
  • LinkLoss Windows-based PC software provides storage, printing, viewing, bidirectional charts, and export
  • Dual wavelength 850/1300 nm
  • Emits and detects 2 kHz "tone" for detection, continuity, and tracing
  • Selectable 0.1/0.01 dB resolution
  • Reliable InGaAs performance for +3 to -70 dBm (standard range)
  • Flexible three-way power: AC, internal rechargeable battery, replaceable alkaline battery
  • Tests two fibers at once
  • Provides system continuity
    Corning Cable Systems, PO Box 489, Hickory, NC 28603-0489. Tel: 800-743-2673; Fax: 828-327-5973.