Corry Micronics offers a complete line of RF switches. The RF switches are controlled by pin diodes that cover a frequency range of 20MHz to 18GHz. The switches are offered as either the reflective or non-reflective style of RF switch. Many of our RF switches have been installed in communications systems, test equipment, filter selectors and antenna selectors...
This optical switch will dramatically improve the reliability of your optical networks by providing redundancy options for transmission devices and paths...
Corry Micronics' Gain Horn Antennas operate in the sub-gigahertz to over 100 GHz frequency range. These antennas can be custom manufactured for different applications, including but not limited to aerospace, military, wireless communications, and medical.
The Surface Mount EMI Filter family consists of two sizes and two circuit types. The 8 mm long filter offers capacitance values up to 4000 pF, and the 10 mm long filter offers capacitance values up to 8200 pF.
Our line of RF VCO's are ideal for use in modern telecommunications systems. Both wide and narrow frequency oscillation ranges are available, tuned from the VCO's DC Bias pin.
Diplexers are three port devices that are used to combine or split signals that are at different frequencies. A diplexer is designed with two fixed bandpass filters that are connected to a common port. Multiplexers are passive devices used to split or combine signals, usually of different frequencies. Once several frequencies are combined, a single transmission medium is used to send or receive the signals
Corry Micronics 90º high power hybrids cover a frequency range from 870 MHz to 2,200 MHz. A 90º hybrid has two outputs that maintain the same output level but the signals on the two outputs are 90º apart. On our hybrids there is a fourth termination or isolation port that absorbs half of any reflected signals from any mismatch on either output...
Corry Micronics' power dividers and combiners come in several different types and form factors. CMI's standard product line includes 0º, 90º and 180º phase dividers. The power dividers equally divide the signal on to each output line...
Corry Micronics Patch Antennas are easily mounted and feature high quality factor dielectric constants...
Filter Pins come in a range of values up to 5,000pF in .090 diameter and are available in "C" and "Pi" configurations...
Spanner bushing filters solve those tight center-to-center hole spacing requirements. The spanner bushings are designed without the hex used on the standard bolt-in series. The spanner feedthrus are easily installed using the CMI spanner tool. Spanner bushings can be installed with center-to-center spacing down to .110" or 2.8mm when using the 2*56 threaded size. Spanners are available with capacitance up to 10,000 pF and sizes from 2*56 to 8*32.
Corry Micronics offers a wide variety of electro-mechanical assembly services, including...
Corry Micronics' skilled Design Engineers, with many years of industry experience, are available for consultation whenever you experience any EMI / RFI issues...
The high current filter family from Corry Micronices consists of three standard current types: 50 ampere, 150 ampere, and 200 ampere. The standard product line filters are rated with a working voltage of 200 volts DC, 140 volts AC, and have a capacitance of 0.22 µF.
Corry Micronics offers a line of waveguide components ranging from the rectangular to the standard gain horn antenna adapters, to the waveguide isolators and circulators to the waveguide directional couplers...
